; This is a sample ~/.gammurc file.
; In Unix/Linux  copy it into your home directory and name it .gammurc
;                or into /etc and name it gammurc
; In Win32       copy it into directory with Gammu.exe and name gammurc
; More about parameters later
; Anything behind ; or # is comment.
; -----------------------------------------------------------------------------

[gammu]

port =com14
connection =at115200
; Do not use model configuration unless you really need it
;model = 6110
;synchronizetime = yes
;logfile = gammulog
;logformat = textall
;use_locking = yes
;gammuloc = locfile
;startinfo = yes
;gammucoding = utf8
;usephonedb = yes


; Step 1. Please find required Connection parameter and look into assigned 
; with it port type. With some Connection you must set concrete model

; ================================================================ cables =====
; New Nokia protocol for FBUS/DAU9P
";    Connection ""fbus"", port type serial"
; New Nokia protocol for DLR3/DLR3P
";    Connection ""fbusdlr3""/""dlr3"", port type serial "
; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
;                              like 6230)
";    Connection ""dku2phonet""/""dku2"", port type dku2 on Windows"
";    Connection ""fbususb"" on Linux"
; New Nokia protocol for DKU5 (and phone without USB converter on phone
;                              mainboard like 5100)
";    Connection ""dku5fbus""/""dku5"", port type dku5"
; New Nokia protocol for PL2303 USB cable (and phone without USB converter
;                                          on phone mainboard like 5100)
";    Connection ""fbuspl2303"", port type usb"
; Old Nokia protocol for MBUS/DAU9P
";    Connection ""mbus"", port type serial"
; Variants: 
; You can modify a bit behaviour of connection using additional flags
; specified just after connection name like connection-variant.
; If you're using ARK3116 cable (or any other which does not like dtr 
"; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr."
"; If cable you use is not powered over DTR/RTS, try using -nopower variant of "
"; connection, eg. fbus-nopower."
; -----------------------------------------------------------------------------
"; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None"
"; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc."
";    Connection ""at19200""/""at115200""/.., port type serial"
; AT commands for DKU2 cable
";    Connection ""dku2at"", port type dku2"
; ============================================================== infrared =====
; Nokia protocol for infrared with Nokia 6110/6130/6150
";    Connection ""fbusirda""/""infrared"", port type serial"
; Nokia protocol for infrared with other Nokia models
";    Connection ""irdaphonet""/""irda"", port type irda"
; -----------------------------------------------------------------------------
"; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc."
";    Connection ""irdaat"", port type irda"
; -----------------------------------------------------------------------------
; OBEX for infrared
";    Connection ""irdaobex"", port type irda."
; ============================================================= Bluetooth =====
"; Nokia protocol with serial port set in BT stack (WidComm, other) from"
; adequate service and Nokia 6210
";    Connection ""fbusblue"", port type serial"
"; Nokia protocol with serial port set in BT stack (WidComm, other) from"
; adequate service and other Nokia models
";    Connection ""phonetblue"", port type serial"
; -----------------------------------------------------------------------------
; Nokia protocol for Bluetooth stack with Nokia 6210
";    Connection ""bluerffbus"", port type BT"
"; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform"
"; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)"
";    Connection ""bluerfphonet"", port type BT"
; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
";    Connection ""bluephonet"", port type BT"
; -----------------------------------------------------------------------------
"; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't"
"; inform about BT services correctly (6310, 6310i with firmware lower "
"; than 5.50, 8910,..)"
";    Connection ""bluerfat"", port type BT"
"; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)"
";    Connection ""blueat"", port type BT"
; -----------------------------------------------------------------------------
"; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about"
"; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)"
";    Connection ""bluerfobex"", port type BT"
"; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)"
";    Connection ""blueobex"", port type BT."
; -----------------------------------------------------------------------------
";    Connection ""bluerfgnapbus"", port type BT, model ""gnap"""
";    Connection ""irdagnapbus"", port type irda, model ""gnap"""

; Step2. According to port type from Step1 and used OS set Port parameter

; -----------------------------------------------------------------------------
"; Port type | ""Port"" parameter in Windows/DOS | ""Port"" parameter in Linux/Unix"
; ----------|---------------------------------|--------------------------------
"; serial    | ""com*:""                         | ""/dev/ttyS*"""
";           | (example ""com1:"")               | (example ""/dev/ttyS1"")"
";           |                                 | or ""/dev/tts/**"" (with DevFS)"
;           |                                 | virtual serial ports like
";           |                                 | ""/dev/ircomm*"" or ""/dev/rfcomm*"""
; ----------|---------------------------------|--------------------------------
; irda      | ignored (can be empty)          | ignored (can be empty)
; ----------|---------------------------------|--------------------------------
"; BT        | Bluetooth device address (example ""00:11:22:33:44:55"")."
;           | Optionally you can also include channel after slash
";           | (example ""00:11:22:33:44:55/12""). Can be also empty."
; ----------|---------------------------------|--------------------------------
; dku2      | ignored (can be empty)          | /dev/ttyUSB* or /dev/ttyACM*
; ----------|---------------------------------|--------------------------------
; dku5      | ignored (can be empty)          | connection with it not possible
; ----------|---------------------------------|--------------------------------
"; usb       | connection with it not possible | ""/dev/ttyUSB*"""

; Step3. Set other config parameters

; -----------------------------------------------------------------------------
; Parameter name  | Description
; ----------------|------------------------------------------------------------
; Model           | Should not be used unless you have a good reason to do so.
";                 | If Gammu doesn't recognize your phone model, put it here. "
";                 | Example values: ""6110"", ""6150"", ""6210"", ""8210"""
; SynchronizeTime | if you want to set time from computer to phone during
;                 | starting connection. Do not rather use this option when
;                 | when to reset phone during connection (in some phones need
;                 | to set time again after restart)
; GammuLoc        | name of localisation file
"; StartInfo       | this option allow to set, that you want (setting ""yes"")"
;                 | to see message on the phone screen or phone should enable
;                 | light for a moment during starting connection. Phone
;                 | WON'T beep during starting connection with this option.
; GammuCoding     | forces using specified codepage (in win32 - for example
";                 | ""1250"" will force CP1250) or UTF8 (in Linux - ""utf8"")"
; ----------------|------------------------------------------------------------
"; Logfile         | Use, when want to have logfile from communication."
; Logformat       | What debug info and format should be used:
";                 |   ""nothing"" - no debug level (default)"
";                 |   ""text""    - transmission dump in text format"
";                 |   ""textall"" - all possible info in text format"
";                 |   ""errors""  - errors in text format"
";                 |   ""binary""  - transmission dump in binary format"
; ----------------|------------------------------------------------------------
; Features        | Custom features for phone. This can be used as override
;                 | when values coded in common/gsmphones.c are bad or
;                 | missing. Consult include/gammu-info.h for possible values
;                 | (all Feature values without leading F_ prefix).
;                 | Please report correct values to Gammu authors.
; ----------------|------------------------------------------------------------
"; Use_Locking     | under Unix/Linux use ""yes"", if want to lock used device"
;                 | to prevent using it by other applications. In win32 ignored

; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us
